复合表面径向滑动轴承的概念和性能预报

近年来的研究发现固液界面的滑移可以减小表面摩擦,但也会造成流体动力效应下降甚至消失.本文提出了复合表面滑动轴承的概念,轴套表面由具有不同吸附和滑移特性的复合表面组成,发现复合表面轴承比普通轴承有许多优点.通过改变轴套表面的滑移特性可以改变和优化轴承的各种性能,例如摩擦系数、承载力、润滑剂流量、承载角等.数值解表明,在轴承高压区改变轴套表面滑移特性,轴承的整体性能会有大幅度提高.例如,本文给出的初步优化设计方案使得摩擦系数降低50%以上,同时承载力可提高20%,并且承载角可以降低33%.本文提出的设计理念不但可用于设计出具有更优异特性的径向滑动轴承,而且可以设计出具有复合表面的轴向滑动轴承或滑块轴承.复合表面滑动轴承在降低轴承摩擦、提高承载能力方面有很大的空间可以探索.     

中柱失效工况下单层组合框架受力理论分析

基于已有试验，本文提出了轴向弹簧和转动弹簧约束的组合框架简化计算模型，推导了在集中荷载作用下刚性、半刚性连接平面组合梁双跨钢框架移除中柱后的荷载-跨中挠度曲线计算公式，考虑了压拱效应和连接刚度的影响，将公式计算结果与试验结果进行对比证明了推导过程和计算公式的可靠性．在对比结果的基础上，根据已有试验和模拟结果对已有悬索阶段的计算公式进行修正，修正后的公式与试验结果吻合较好．     

金属塑料复合材料在甘油或三乙醇胺润滑下的摩擦磨损性能研究

合理利用选择性转移效应，能够有效地延长摩擦零部件的使用寿命，但是，现用的大都是铜－钢或铜合金－钢选择性摩擦副，这在润滑不良情况下容易发生擦伤甚至咬死而制造机械零部件报废。因此，研制了一种钢背／青铜粉／（ＰＴＥＥ－（Ｃｕ２Ｏ）三层复合材料，并且利用ＭＰＶ－１５００摩擦试验机对其分别在甘油润滑和三乙醇胺润滑下的摩擦学性能等进行了试验研究，结果表明，复合材料在甘油或三乙醇胺润滑下的摩擦系数比干摩擦时的低     

Transient response of a finite crack in an orthotropic strip under the in-plane shear impact

The transient response of a central crack in an orthotropic strip under the in-plane shear impact loading is studied by using the dual integral equation method proposed by Copson and Sih. The general formula for the shear stress intensity factor near the crack tip is derived. Numerical results of with in various cases are obtained by solving the second kind Fredholm integral equation and by performing the inverse Laplace transform.     

任意叠层球壳内的应力波传播

提出一种有效求解方法，求解了任意叠层球壳在动载荷作用下的应力波传播。首先，利用有限Ｈａｎｋｅｌ变换和Ｌａｐｌａｃｅ变换求解了每一单层的弹性动力学解。然后，利用叠层球壳的内、外边界条件和层与层之间的连接条件确定每一单层解中的待定常数。从而，我们可以得到应力波在叠层球壳内传播的精确解。最后，我们计算了在一个突加内压作用下的两层球壳（Ｓｔｅｅｌ／Ａｌ）和三层球壳（Ｓｔｅｅｌ／Ａｌｌｏｙ／Ａｌ）内的应力波传播。求解过程和计算结果表明文中提出的求解方法是简便可行的。     

Einsatz von DMS- und Piezomeßtechnik zur direkten Schubspannungsermittlung in der Kapillarrheometrie

Zusammenfassung Der Stand der Kapillarheometrie mit den Vor- und Nachteilen der einzelnen Systeme und Meßverfahren wird dargestellt. Ausgehend von diesem Stand werden zwei alternative Meßverfahren, nämlich Piezo-Einzelkraftund DMS-Meßverfahren, zur direkten Schubspannungsermittlung besprochen und eine nach diesem Prinzip konzipierte Versuchsdüse vorgestellt. Die mit dieser Düse erhaltenen Meßergebnisse zeigen im Vergleich zu konventionell, d. h. unter Anwendung des Bagley-Verfahrens, ermittelten Fließkurven im Falle der Einzelkraftmessung gute Übereinstimmung. Das Problem der Einlaufdruckkorrektur ist bei diesem Konzept von vornherein nicht vorhanden, und der ununterbrochene Fließkanal erlaubt, bei entsprechender Erweiterung auf zwei Kraftaufnehmer, einen unproblematischen Einsatz im On-line- oder sogar im In-line-Betrieb in der Polymerverarbeitung.Schlüsselwörter Rheometrie; Kapillarrheometrie; Schubspannungsermittlung; Piezokraftmessung; DMS-Anwendung; Kunststoffschmelzen; On-line-Rheometrie

---

The state-of-the-art of capillary rheometry, especially the advantages and disadvantages of different systems, is presented. Two measuring methods, a piezo single-force transducer, and a strain-gauge device combined in a testing die are compared. The strain gauges are fixed at the outside of a small capillary to detect the resulting wall shear stress between inner surface of the die and polymer flow by measuring the axial strain in the wall of the die. The single force method uses an elastic section of the die which uncouples the die from the supporting structure without changing the cross-section of the flow. The uncoupled part of the die is supported by a stiff, piezo-force transducer that detects the integral effect of wall shear stress. The resulting flow curves compare well with those using the Bagley method. With the novel die no entrance pressure-loss correction is needed. In principle, it also could be used as an on-line device for polymer processing.

Vortrag, gehalten auf der Jahrestagung der Deutschen Rheologischen Gesellschaft, TH Darmstadt, 19.–21. April 1989.     

钢-混凝土组合梁受扭性能全过程分析

在合理假定的基础上，根据混凝土、钢梁和钢筋的本构关系，利用平衡及变形协调条件，推导出了适用于组合梁受扭全过程分析的一系列方程式，并提出了组合梁受扭分析的简化算法。然后，用VC 6．0编制了分析程序，制作了输入和输出的可视化界面。最后，对实验和理论分析结果进行了对比，结果表明方法合理，精度满足要求。     

Influence of cyclic loading on crack growth kinetics in a viscoelastic orthotropic plate made of a composite material

The kinetics of crack growth in a viscoelastic orthotropic plate made of a composite material is analyzed. The external load is the superposition of a cyclic load and a constant tensile load. The level of the tensile load is assumed to exceed the amplitude of the cyclic load. The kinetic curves are compared with the constant tension curves. The effect of the cyclic component is studied.Translated from Prikladnaya Mekhanika, Vol. 40, No. 9, pp. 116–122, September 2004.     

A minimal composite theory for stability of non-parallel compressible boundary-layer flow

A new minimal composite theory that extends the approach of Govindarajan and Narasimha [1] is proposed here for 2D non-parallel compressible boundary-layer stability subject to 3D disturbances. The mean profiles are obtained from Hortons analysis, which provides a good approximation for a large range of Prandtl numbers at non-zero pressure gradients. In the lowest order, all effects of order lower than O(R^-2/3) anywhere in the boundary-layer are included, R being the local boundary-layer Reynolds number; the resulting non-parallel formulation yields a set of four ordinary differential equations, as compared to the five coupled equations of classical parallel flow theory of Mack [2]. The largest effect on stability of flow non-parallelism is found to be due to the wall-normal advection of velocity and temperature disturbance quantities by the mean flow. The present theory shows that the bulk viscosity, invariably included in compressible stability theories, is irrelevant at the lowest order. In comparison with the full [O(R^-1)] non-parallel theory, the present theory is marginally better than the parallel flow theory. PACS 03.50.De, 04.20-q, 42.65-k